This is the latest
FissureMan gold prospecting tool released for use with the BLUEDOG 1.5" hand dredge. This new attachment was developed to address requests received from individuals looking for a device that collects material using a hose and check valve system that could be used with their existing BLUEDOG hand dredge. This new attachment is easily attached to the BLUEDOG hand dredge and will allow the mass collection of material -1 mesh and smaller.


DESCRIPTION


This attachment has been expertly manufactured and designed for use with the bayonet connection feature found on FISSUREMAN hand dredges. This product is designed to allow current owners as well as all future owners the BLUEDOG hand dredge to use this attachment.

The design incorporates a 1" nozzle to provide a complete prospecting tool that will allow setup at a given location in a stream bed and provide the ability to access and easily retrieve large amounts (literally gallons!) of gold or gem bearing material to process with sluices, high bankers, spiral wheel separators or any chosen piece of processing equipment. With a two-gallon collection capacity, the
SANDMAN B attachment very easily collects large quantities of material quickly. This is a great tool to use where a powered dredge is not allowed. This tool is the best way to move a large volume of material from a stream bed almost as easily as a powered dredge. The SANDMAN B attachment will provide collection performance and volume material collection that out paces any one pull  dump and dump simple hand dredge design claimed to be "efficient" for moving a lot of material as may be found or claimed elsewhere on the internet.


The referenced video actually presents the original FISSUREMAN 2" hand dredge version but will give the viewer an idea of the material moving capability of this technology. The BLUEDOG 1.5" hand dredge version will move an equivalent amount of material (possibly more) since it allows the collection of slightly larger material of less than 1 inch overall diameter.


FEATURES
 
-    Attaches directly to the BLUEDOG hand dredge with no additional modification.
-    Incorporates a 1" ID large bore nozzle.
-    Ample six-foot length of flexible discharge hose for easy bucket positioning.
-    Collects material that is -1 mesh or smaller in overall diameter - not just the sand.
-   The original hand dredge can still be used as a sniping/sampling tool when the SANDMAN B is not  
     attached - just replace with nozzles of appropriate size and use a collection cup.
-   The bucket has a large 2-gallon collection capacity and a BRV - Bucket Relief Valve.
-   The check valve used is inexpensive and easily accessed.
-   The bucket lid is the easiest to open of any other design - it only takes one hand but is tight enough to maitain all material even
     if turned upside down!!
-   Fast shipment combined with both pre and post sale customer assistance.
-   PROUDLY - MADE IN AMERICA
 

OPERATION

Find a suitable location containing plenty of sand, gravel, water and hopefully gold. Attach the SANDMAN B to your FissureMan BLUEDOG hand dredge per the included, easy to follow instructions. Set and secure the bucket nearby and then pump the hand dredge to prime it and fill the bucket with enough water to weigh it down. This will provide initial stabilization for the bucket when you start to collect material. Begin suction collection of your material. Suction and collect as much material as the bucket can hold or that you can easily move to your processing equipment.

To empty the bucket just pop the hinged snap lock lid up and transfer the collected material to your pan, sluice, high banker or whatever favorite material processing equipment you prefer to use. Push the hinged lid down and begin again. It's as simple as that!

Operational tip: To help hold the bucket in place in fast moving water it is suggested that you tether it with a rope or other suitable restraining strap attached to a stake or ground screw driven into the streambed or ground nearby. Alternatively a large rock or other natural anchor will work as well. Tethering the bucket to yourself can be done but is not advised as fast moving water may pick up the bucket and carry it away and while doing so may possibly drag you down stream with it.
FISSUREMAN
SANDMAN B
ATTACHMENT

Your half way there if you already own a BLUEDOG hand dredge. All you need to do is purchase the SANDMAN B Attachment shown at the top of this page and get started!

Purchase a
BLUEDOG 1.5" hand dredge and the SANDMAN B Attachment and get all the benefits of one of the most advanced and versatile hand dredges in the gold and gemstone prospecting field today.



What you will receive:

1- SANDMAN B Attachment
To Include:
1- 1" Large Bore Nozzle
1- Check valve
Hose and Bucket assembly

PRICE: $45.50

Example view of the SANDMAN B attached to a BLUEDOG Hand Dredge
(The hand dredge is sold seperately)